MDC1 Series Single Valve MDC1X27XGAEXMTA

  • Can achieve Category 1, PL c, when used with proper safety controls
  • The “fail-to-safe” safety function is ensured as long as the poppet is able to go back into the start position
  • Poppet Design that is dirt tolerant, wear compensating for quick response and high flow capacity
  • PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
  • On energization, the Soft-Start (EEZ-ON®) allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
  • Threaded or modular port connection allows connection to Air Entry System (Lockout Valve, FRLs)
  • Threaded exhaust port for canister silencer or remote exhaust
  • SISTEMA Library available for download

Need Help? No Problem!

Customer Service

91-44-4395 3800

Need Help? No Problem!

Customer Service

91-44-4395 3800


Product Information

Series MDC
Valve Function 3/2 Single Solenoid
Construction Poppet
Actuation Electrical
Lockout Not Included
Monitoring External
Feedback Not Included
Communication Not Included
Reset Not Included
Exhaust Type Threaded Female Port
Voltage 24 VDC
Mounting Inline/Modular
Ambient Temperature Range (Celcius) 4 to 50
Media Temperature Range (Celcius) 4 to 80
Flow Media Compressed Air
Valve Body Material Aluminum
Poppet/Spool Material Acetal and Stainless Steel
Seal Material Buna-N
Safety Category Category 1
PL Rating PL c
Safety Integrity Level SIL 1
DGUV Certification Pending
CE Certification Yes
EAC Declaration Yes
CSA/UL Certification Yes
Soft Start Not Included
Basic Size 1"
Exhaust Size 1-1/2"
Thread Type G
Operating Pressure 36 to 150 psig (2.5 to 10.3 bar)
Pressure Gauge Digital Transducer
Weight 9.35 lbs (4.24 kg)
Solenoid Connection M12
Inlet Size 1-1/4"
Outlet Size 1-1/4"